Wuxi Wondery Industry Equipment Co., Ltd
Advantages: More than 10 years experience in industrial equipment; Advanced processing equipment and technology; Full technical support for pre-sales and after-sales; A team of senior engineers for
Add to Cart
Gas Fired Aluminum Metal / Scrap Melting Furnace Tilting 500Kg
Application
The crucible type metal melting furnace is applicable to melting of ferrous metal and alloy of low melting point.
The rated temperature of the furnace is 850℃.
Technical Parameters
| crucible capacity: 500Kg; |
| melting rate: 250kg/Hr ( at continuous working status and under rated working conditions); |
| fuel gas: natural gas with heat value at 8400Kcal/M3; working pressure: 5KPa(500mmH2O); |
| fuel gas consumption: about 75-80M3/ton aluminum |
| rated working temperature: 850℃ |
| emperature control accuracy: ±15℃ (aluminum liquid); |
| rated working condition: a) The metal melting furnace and other facilities are working at a normal condition; b) The heat value of the fuel gas meets 8400Kcal/ M3; c) The furnace is working in a continuous manner. d) The fuel gas consumption is calculated based on 3 hours of continuous working. |
Furnace Structure
The aluminum metal melting furnace shell is fabricated from steel plates and sectional steel while fire block
ring is made of cast iron. Refractory lining: The refractory lining of the melting chamber is built with once-forming
casting material. This structure has a strong strength, and a long service life. (compression strength: 140Mpa at
a temperature higher than 110℃; linear change rate: 0.1%).
The heat isolation layer is comprised of Grade One silicate aluminum fiber and light refractory bricks.
Burning system
The burning system of the metal melting furnaces employs European Riello burner, which has functions of
temperature control, automatic ignition, flame detection, and automatic start-up or shut-off of the burner based
on the temperature upper limit and lower limit.
Hydraulic Tilting System
The molten liquid is poured out through a hydraulic tilting system.
Supply Scope
| Metal melting furnace body, 1 set; Burner, 1 set; ITALA Brand; Automatic temperature controller, 1 set; Thermal coupling, 2 pieces; Graphite crucible, 1 piece, Vesuvius brand; Hydraulic tilting system; Manual, 1 copy. |
Our crucible melting furnaces can also be equipped with Morgan brand graphite crucible. 