1000mm Stroke Copper Tube Expander Machine For Making Condensers , High Performance

Vertical Tube Expander Machine 1000mm Stroke for Making Condensers

1. Technical Parameters

2. Equipment Characteristics

2.1 structural type: The vertical tube expander machine is of a vertical structure. The machine could finish tube

expansion, tube end forming, and tube edge folding during one clamping.

2.2 The secondary end-forming length is adjusted by rotation up-down movement of the expansion

screw driven by the chain and srpocket wheel, and the chain and sprocket wheel is controlled by the

reducing gear and motor.

2.3 The expansion stroke (distance between 2 side plates) is controlled by the stroke screw driven by

motor and worm gear. The screw is connected with the rotary encoder.The length is changed by PLC.

2.4 The vertical tube expansion machine adopts expansion rod protection device which could stop the machine automatically in

case of bended expansion rods.

2.5 The expansion rods adopt double-clamping device to prevent looseness during expansion process.

2.6The vertical tube expander machine adopts guide column and slide rail for guidance, which has a high precision and strong

structure.

2.7 The vertical tube expander machine is equipped with a manual door for easy installation of products.

3. Equipment Components

3.1 The main pneumatic components of the equipment are of ALLGREATor AIRTAC brand.

3.2 The hydraulic components of the equipment are of Taiwan brand such as Janus, Risun or Yuken.

3.3 The main electrical components are of Schneider, LS, IDEC, Kinco or other famous brand. The electrical

control system meets relevant national safety standards.

4. Basic Parameters

4.1 Power supply

• Power supply: AC380 V,50 HZ, 3-Phase 5-Wire;
• Air source pressure: 0.4~0.6Mpa
• End-forming motor power: 370W

4.2 system pressure: normal working pressure: ≤10MPa, max working pressure: 22MPa.

Products expanded by vertical tube expander machine: